10 Best Waterproof Low Hiking Shoes
Updated on: November 2023
Best Waterproof Low Hiking Shoes in 2023
Columbia Men's Redmond Waterproof Hiking Shoe, Black, Squash, 11 D US
Merrell Men's Moab 2 Waterproof Hiking Shoe, Beluga, 10.5 M US
- M Select DRY seals out water and lets moisture escape so you stay dry when you're on the move
- Performance suede leather and mesh upper
- Bellows, closed-cell foam tongue keeps moisture and debris out
- Protective rubber toe cap
- Vibram TC5+ sole ; 5mm lug depth
Columbia Women's Redmond Waterproof Hiking Shoe, Charcoal, Razzle, 8.5 B US
- DURABLE HIKING SHOE: The Columbia Women’s Redmond Waterproof Low Hiking Shoe is an excellent waterproof low top that is fashionable and functional. It’s sure-footed and incredibly comfortable.
- FASHIONABLE HIKING SHOE FOR LADIES: This imported low-top hiking shoe is perfect for trips to the mountains while being stylish enough for daily use in off-terrain environments.
- ADVANCED TECHNOLOGY: The upper layer is a combination of suede leather, mesh, and webbing. The midsole is lightweight Techlite material, while the non-marking traction rubber outsole provides superior traction.
- CUSHIONED WITH MAXIMUM ABSORPTION: Columbia Techlite material is added to this waterproof hiking shoe to provide superior cushioning for impact absorption and maximum comfort while navigating aggressive terrain.
- OMNI-GRIP: This multi-terrain traction system matches specially formulated compounds and treads to specific environments. A dual-zone winter tread pattern ensures solid footing on surfaces such as ice and snow, providing grip for every environment.
Merrell Women's Moab 2 Vent Hiking Shoe, Smoke, 7.5 M US
- Breathable mesh lining
- Performance suede leather and mesh upper
- Bellows, closed-cell foam tongue keeps moisture and debris out
- Merrell M Select FIT.ECO+ blended EVA contoured footbed with added zonal arch and heel support
- Vibram TC5+ sole
Under Armour Men's Culver Low Waterproof Sneaker Hiking Shoe, Black (001)/Pitch Gray, 12
- Tight weave textile, suede & treated leather upper for lightweight durability & comfort
- Waterproof boot liner for added shield from the elements
- Rubber heel overlay for protection
- Lightweight EVA midsole for optimal cushioning
- ESS plate for push through protection
Columbia Women's FIRE Venture Low Waterproof Hiking Shoe, Ti Grey Steel, Aquarium, 6.5 B US
- Techlite lightweight midsole for long lasting comfort, superior cushioning, and high energy return.
- Omni-Grip non-marking traction rubber.
- Waterproof suede and textile upper.
- Metal eyestays and hardware.
- Omni-Tech waterproof breathable seam-sealed membrane bootie construction.
Columbia Women's Redmond V2 Waterproof Hiking Shoe, ti Grey Steel, Plum Purple, 6.5 Regular US
- ADVANCED TECHNOLOGY: The Redmond V2 Waterproof Hiking Shoe features our Omni-TECH seam-sealed membrane bootie construction, combined with our TECHLITE lightweight midsole, for long-lasting comfort with superior cushioning and high energy return.
- DURABLE HIKING SHOE: The perfect combination of high function and performance designed into our classic Columbia hiking shoe, this all-purpose hiker will deliver comfortable and reliable service.
- ALL TERRAIN TRACTION: Our signature Omni-GRIP non-marking traction rubber outsole provides high grip across a wide variety of terrain, and versatile three-season use.
- HANDY FEATURES: It features top metal rivets and lacing aglets, along with our reinforced and trail proven main webbing aglets.
- REINFORCED TOE AND HEEL CONSTRUCTION: Designed for extended use, we've reinforced the toe and heel barriers, and extended the outsole toe overwrap to guard these key wear points.
Columbia Men's Redmond Trail Shoe, Pebble/Dark Ginger, 10.5 M US
- Rugged trail shoe in a durable and breathable combination of suede, leather, and mesh
- Techlite comfort foam midsole
- Mesh-lined collar and tongue
- Omni-Grip traction outsole
Nord Trail Mt. Hood Low Men's Hiking Shoes, Waterproof Hiking Shoe, Breathable, Lightweight, High-Traction Grip (10, Black/Royal Blue)
- ✅Waterproof & Breathable: The synthetic uppers with Softshell waterproof membranes features flexible, quick-drying and highly breathable.
- ✅SILVADUR Technology: Turbo air SILVADUR insoles offer a carefully engineered upgrade in performance and comfort. Nord Trail insole features our exclusive turbo air foam, designed to absorb shock and return energy to your feet with every step.
- ✅Shock absorption: Compression-molded EVA midsole provides comfort, absorbs shock and adds stability.
- ✅High-Traction Grip: Confidence-inspiring traction offers unique lugs pattern with more contact surface area underfoot, providing improved lateral stability and enhanced traction.
- ✅Protection: Gusseted tongues keep debris out so you can focus on the trail.
Columbia Women's Redmond Trail Shoe, Boulder, Sky Blue, 9 M US
- Combination suede leather, mesh and webbing.
- Techlite lightweight midsole for long lasting comfort, superior cushioning, and high energy return.
- Omni-Grip non-marking traction rubber.
How to Embroider on Polyurethane Laminated (PUL) Fabric
Embroidering on polyurethane laminated (PUL) fabric is a fun way to embellish bibs, diaper covers, wet bags, and diaper bags. Special care must be taken to seal the design and make it waterproof.
Polyurethane Laminated Fabric, commonly referred to as PUL, is a polyester fabric coated with a shiny waterproof barrier. PUL fabric can be used in a variety of fun projects for children and grown ups alike. Because of the waterproof barrier, PUL is often used as a cloth diaper cover, for baby bibs, wet bags, rain gear, changing pads, diaper bags, and more.
Embroidering on a plain colored PUL is a great to way to make a handmade gift even more special. The waterproof barrier on PUL fabric means that additional steps are necessary if you want your project to maintain its waterproof character.
First, when embroidering on PUL fabric, be sure to use a ball point needle. My machine, a Brother PE-780D, does not require an embroidery needle, so a regular ball point needle will work with it. Make sure to change the machine's needle frequently so that the embroidery stays neat.
Next, decide what method you plan to use to back your PUL fabric to make sure that it stays waterproof. One way to back PUL fabric is to simply use a facing, or a double layer, of the same PUL fabric on your project. For instance, if you are making a waterproof PUL diaper cover, embroider on the outer layer of PUL. When assembling the diaper, use a second full layer of PUL on the inside of the diaper. The same technique can be easily used for bibs, changing pads, and other small projects.
However, if you are working on a larger project, or if you feel that a double layer of PUL is simply too bulky, it is possible to use a second layer of PUL to cover just the embroidered area of your project. This method requires a bit of planning when hooping the project in the embroidery machine, but the end result is a neatly covered and waterproof PUL project.
One way to hoop your PUL project is to use a sticky-backed tear away stabilizer. While a sticky-backed stabilizer works for some, I prefer to use a medium cut-away stabilizer when working with PUL projects. I find the results are neater and the designs stitch out more accurately.
In addition to the medium cut-away stabilizer, cut two smaller pieces of PUL fabric that are approximately one and half times the size of the finished embroidery design. Place the medium cut-away stabilizer on the hoop, then place one of the smaller pieces of cut PUL over the cut-away stabilizer shiny side down. Set the other small piece of PUL aside for now.
Next, center your PUL project on the hoop. Once your stabilizer, PUL piece, and PUL project are all centered on the bottom part of the hoop, firmly place the top piece of the hoop over the stabilizer and PUL sandwich and arrange all the pieces so that they are lying smoothly in the hoop. Use your embroidery machine to stitch your embroidery design.
Once your design is finished, remove the project from the hoop and trim off the excess stabilizer, leaving approximately one quarter inch of stabilizer around the embroidery design. Do not trim the small piece of PUL fabric backing the embroidery design.
Now place the extra small piece of PUL that was set aside earlier shiny side down on the back side of the embroidery design, matching the edges of the other small piece of PUL that was used to back the embroidery design. Stitch only the two small pieces of PUL together, hiding the stabilizer between the two small PUL pieces. Do not stitch the larger piece of PUL that you embroidered the design on. Now the back of your PUL embroidery project will be covered by the PUL, and the embroidery design will not wick.
After the embroidery design is sealed inside the PUL pieces, complete your project according to the project instructions.
